When you have to remote desktop to a Windows based server or computer, your default option is RDC protocol. This is a useful utility if you’re connecting to one computer at a time. So what if you need to connect to ten or more? Do keep in mind, not all those computers have the same credentials, and saving all those .RDP files to your desktop will get very cumbersome.
Tag: geek
Excel 2007: “Too many different cell formats” error message
Getting around RDC protocol
From a Windows perspective, you kinda need Windows remote desktop protocols. Even if you don’t know what it does, your IT admin uses this on a daily basis if he/she is running a Windows based environment.
Remote Desktop in a nutshell is the ability to “drive” another Windows based computer remotely. So what happens when you’re trying to connect to a Windows computer, from a non-Windows computer?
I ran across this when working on a super old Windows 98 computer. As used as I was to many Windows 7 commands, taking a quad leap backwards felt as unnatural and old fashioned as you would think. I’ve even memorized the command line to bring up the remote desktop protocol from run line:
mstsc -v: thebigoldserver.somecompany.com
See? Nice and simple. But the command prompt on the Windows 98 computer simply gave me the error that such a command did not exist.
Once I realized that it wasn’t 1998, I had to rethink my approach. So, how could I connect to a server without the RDP program?
2x Client. This little guy is touted as an RDP solution (thus the anti-citrix bandwagon). The great thing about 2x is that it does not require any older version of RDP to work (as many software vendors tend to do: repackage their software using existing run times).
I’m also an avid visitor of portableapps: programs that can run directly from a USB stick. The website offered the 2x client as a portable application. Onto the USB stick it went, along with a few other useful utilities.
2x works with OS X, android and multiple distributions of Linux as well. So there really is another way to get around the RDC protocol.
-Dexter
How to: Be a freeware champion
Windows in general can a be a pain in the ass. There’s tonnes of software on the market that’s pricey depending on what you want get done. Sometimes you need an enterprise class solution for your vexing problem and it can only be achieved by dropping a few thousand dollars.
And sometimes, just sometimes you can peruse the freeware section of a website and be astounded by what is lying in wait that can be your perfect solution. The problem therein is which website offers the safest surfing experience? Can you trust a websites freeware? Is it really malware just waiting for you to execute? There’s never an easy answer. So here’s a sure fire list of websites that offer freeware that I know and use on a regular basis:
Gizmo’s freeware
http://www.techsupportalert.com/
A real nugget of free applications that do everything. All content is nicely organized in categories that make sense. Most freeware is crapware free and each software has independent reviews based on a 5-star rating system. All pro’s and con’s for each software is listed, and offers up screenshots for any software you’re wary of installing.
NirSoft
http://www.nirsoft.net
For all the IT Administrator essentials, most are packed away in this must-have website. Utilities range from wireless sniffers, DNS checkers, password recovery options to system tweaking tools. Everything is laid out right on the main page heading style. This website scores extra points as all software is developed by the same programmer Nir Sofer, and most are stand alone executable files that do not require installation!
Major Geeks
http://majorgeeks.com/
One mother of a download site, Major Geeks has been a staple of the internet and continues on with it’s tradition of offering all it’s freeware hosted locally on it’s internal servers. Just about anything can be found right here.
So go on, give it a shot and see what you can download.
-Dexter
How to: Save your contacts in Outlook
How to: locate product numbers and serial numbers on HP and Dell computers
You have to know the serial numbers of HP computers and servers in order to get warranty.
command | information |
wmic bios get serialnumber |
HP: shows Serial Number, Dell: shows Dell Asset tag |
wmic csproduct get name |
HP: shows model name: Dell: shows base model |
wmic /namespace:\\root\wmi path MS_SystemInformation |
HP: shows product number, Dell – nothing man, just nothing |
How to: Check your .Net Framework version on Windows 7
.Net Framework was easy to spot in the older versions of Windows XP, if you went and checked your ‘Add or Remove Programs’ section of control panel you’d see it plain as day:
My love letter to Drobo
Drobo is a US based firm that makes storage devices for home and small business. The amount of bays available range from 2 to 10 and you can purchase disks of any size, and all the units offer protection using their home-grown BeyondRAID.
I personally don’t own a drobo, I have to use one at one of my jobs and it’s quite painful, the list below will explain why:
- You have to use the Drobo Dashboard for everything. The Drobo Dashboard is a windows based platform, and installs a Drobo service into your windows registry. It only takes up 20 MB of space, but you have to use it to configure shares, administrator passwords, IP addresses, and most of the other tools including copy jobs and so forth. The dashboard is java based so it seems to take a long time between clicks to get somewhere useful. Waiting to get to the admin panel takes 4 clicks, and clocked in about a minute. That might not seem like a long time, but when you’re pressed for time waiting for some animation to finish, it gets very tiring, very quickly. I’d prefer to see a web browser interface. My home NAS has it, and it can be accessed anywhere as long as I can forward the right port.
- It’s slow. Copying to and from this thing caps out at 20MBps. That’s on a good day. It’s surprising since I’m running full GB nics forced with 9000MTU’s on each Drobo. This is using a Cisco catalyst 2960 with full Gig duplexing turned on. I can copy files from PC to PC at close to 80MBps – why does this drobo with 10TB of storage only recieve a quarter of that speed? I thought “maybe it’s just the computer I’m using”. So after installing SSH with many reboots (see below) I logged in and did a “rm-r” command from putty. The command seemed to take up to 5 minutes to work on one 4GB file.
- The apps don’t always work. The Drobo website says it’s a simple: from the GUI (that has to be loaded from Windows), enable the droboapps check-mark (in a place that doesn’t really make sense). Then the unit restarts (why, I don’t know). When it restarts, it produces a new share called droboapps. Put whatever droboapps you can find from the Drobo website into this folder and restart [again] so the folders expand and install. However, the apps don’t always work properly – I tried to get ssh working and after restarting how many times it still didn’t show port 22 as being open. The same thing happened with Rsync: after finally getting ssh to work after about 5 reboots I tried Rsync from the command line, only to be shown ‘Rsync is a not a recognized command’. Lovely.
- You can’t view the log files. The log files on the Drobo are all encrypted when you generate them. Why would a company encrypt their log files in the first place? Some of the most useful features of any NAS or storage unit is the ability to view history in the log. Useful information such as boot times, RAID configuration, share points, local users, groups, even being able to see a TIME stamp would be helpful, instead all I have is the GUI, that can only be loaded from a local computer, and only has basic options.
- You don’t know what kind of RAID configuration you’re getting. When you first set up the RAID array, it doesn’t specify what type you want, it just seems to create it’s own RAID structure (see BeyondRAID). The only option you’re presented with is “protect my data”. I don’t even know what that button really means, it just does SOMETHING and the amount of free space I have somehow changes.
- Copy jobs aren’t saved on the the unit. There’s a Drobo copy feature you can access that allows you to copy information from a PC to the Drobo. I found this useful as I could copy another network share onto the Drobo. However, that option disappears when you change computers or open the Drobo GUI on another computer – the job should stay with the drobo device. Just annoying
- Barely any features. No USB connections, no eSATA connections, no print service ability, droboapps are sparse if not dismal.
Perhaps I’m a little critical on the Drobo offering, as I had tested all performance with one unit. When another showed up on my desk I had to configure a replicated backup solution I was a little perplexed why both had terrible transfer performance. Drobo insists that the ISCSI transfers are fantastic, but I don’t plan on putting any virtual media onto this yet as I’m not certain it will break past the 20MBps threshold I consistently achieve. The original intent for this was to be used as a file server, given the poor performance I can’t in good conscience recommend it. The other painful point is the lack of Active Directory integration, the linux file permissions just don’t work for a business with a Windows Domain Controller.
I’m hardly the first person to complain about Drobo units, and by the looks of things I certainly won’t be the last.
Drobo seems to reply back to every piece of negative media, which makes me wonder if the company is attempting more damage control and not enough development. I’m certainly not fishing for anything here, with my experience with this device there’s certainly no way one would find it’s way in my home.
Specs:
Model: Drobo Pro FS - (2 of the same model )
Disk config: 8 x 2TB WD Green 5300 RPM drives for both
Role of Drobo Pro FS (1): backup to disk location
Role of Drobo Pro FS (2): replication of backup to disk
-Dexter
How to: uninstall Trend Micro OfficeScan [locally]
*it is Windows XP/Windows 7
*A Version of Trend Micro OfficeScan, probably 10 or above
*Computer is offline, or not connected to network
*You don’t know the uninstall / unload password
*the computer was part of your domain, but is no longerTrend Micro makes a great product, so great in fact that’s it’s near impossible to crack uninstall the product if you forgot the uninstaller key.This is generally an easy thing to do if you access to the Trend Micro admin console. Of course, that would be too easy. My case involved a computer from a company that was bought out, had the software installed and needed our company’s AV installed.Go to the Trend Micro Office Scan Client directory; usually: C:\Program Files\Trend Micro\OfficeScan Client\Locate and open Ofcscan.ini with notepad (or any other text editor).
look for the
[INI_CLIENT_SECTION]
change the value of the Uninstall_Pwd to:
!CRYPT!523F7DC2E525044E2800FCDEA7E5D78B70C0A4165387060525E3EE66D5D2D2F460EA361E712B5F871FD473C7A6C
and change the value of Unload_Pwd to:
!CRYPT!523F7DC2E525044E2800FCDEA7E5D78B70C0A4165387060525E3EE66D5D2D2F460EA361E712B5F871FD473C7A6C
save and close the file.
Unload officescan by right clicking the icon on the bottom dock and choosing ‘unload’.
for the password, enter: “trendmicro” (without the quotes).
You can now uninstall the program with the same password!
-Dexter
How to: Add Ctrl+Alt+Del to your Windows 7 Computer
If your computer is part of a Windows Domain, you will likely see this screen staring at you first thing in the morning: